Главная / Production / Electrical supply / Mine current collector ТР

Mine current collector ТР

The mine current collector ТР is designed for current collection from the d.c. contact system and current supply to electrical equipment of electric locomotives with adhesive weight of 3,4, 7, 10, 14 and 28 t., exploited in non-gas-and-dust-hazardous coal mines, as well as in workings with fresh air current of mines of the Ι and ΙΙ gas-and-dust categories pursuant to the safety rules in coal mines NPAOP 10.0-1.01-05.
The current collector is designated for work under the following conditions:
- maximum altitude above sea level – 1200 m;
- environment – explosion-proof, mining;
- dust content – up to 250 mg/m3;
- environmental temperature – minus 5 to plus 35 0С;
- vibration of attaching points within the frequency band 1 to 100 Hz with acceleration of 1g.

Technical characteristics

Parameter designation Unit of measure Standard
Kind of current - Direct
Operation mode - Continuous
Nominal voltage V 250
Current rating:
- in motion
-in parking
А 400
20
Statistical pressing on the trolley line:
-active
-passive
N 45
80
Actuation force of a synchronizer on operating height of 800 mm Н 300-340
Minimum operating height mm 500
Maximum operating height mm 1100
Height in transport position on the electric locomotive mm 400
Length in transport position on the electric locomotive mm 1470
Length on chariot mm 600
Length on contact strip (with deflectors) mm 900
Mass кг 45

Мероприятия:




Другие мероприятия →